The Expert Sleepers FH-2 module is a real gem. This is a wonderfully powerful module but can sometimes be a bit difficult to configure/use. In this page, I share tips and resources that I find useful for mastering the FH-2.
Configuration tools
- My own version of the FH-2 Configuration Tool.
- The official FH-2 Configuration Tool : https://expertsleepersltd.github.io/FH-2_tools/fh2_config_tool.html
- Other tools : https://expertsleepersltd.github.io/FH-2_tools/
Firmware
- FH-2 firmware announcement thread on modwiggler.com.
- Official doc & tools : https://www.expert-sleepers.co.uk/fh2firmware.html
Load a configuration with a MIDI PC message :
Manual page 16 :
Config prog change ch
Sets a MIDI channel on which Program Change messages will change the current configuration, or '0' to disable this feature.
Manual page 20 :
Preset Program Change Ch
The MIDI channel on which to respond to Program Change messages by changing the current Preset, or '0' for Off.
MPE :
USB :
- The USB A socket (the upper, larger one) operates as a host – this is where you connect USB devices (including hubs).
- The USB C socket (the lower, smaller one) operates as a device – using this you can connect the FH-2 directly to a USB host such as a computer.
There is (currently) no difference in behaviour depending on whether the FH-2 receives its MIDI from the host or device port – both are handled in exactly the same way.